PVSTOP Solar Panel Block Out for PV System Owners and Operators

Make solar energy safe with PVSTOP

Essential for Maintenance Personnel and Site First Responders

 PVSTOP Solar Panel Block Out is the only known solution for ‘switching off’ solar panels, making them safe in the event of a short circuit or emergency incidents such as a fire, flood or storm. PVSTOP acts as a liquid blanket sprayed onto the solar panel and blocking out the light – the energy source, and rendering the solar PV system electrically safe.

Who is PVSTOP for 

PV solar panels produce dangerous DC electricity whenever they receive light. Maintenance personnel and first responders are particularly at risk when dealing with emergency situations that involve solar panels, and without the ability to ‘switch off’ the power, will adopt a defensive position for properties with solar panels.

Using PVSTOP to switch off the solar panel first, maintenance personnel and site first responders are protected from the hazards of lethal DC voltage, allowing for early intervention and asset protection in an emergency.

If solar PV system components fail or there is an emergency situation, what better than to have a solution on-site, that can be used for early intervention or is on hand for the Fire and Rescue Services to use when they arrive?

Early intervention is possible (if safe to do so) by reducing power generation earlier in a failure/fire scenario, leading to damage limitation.

Having PVSTOP Solar Panel Block Out on-site helps protect lives, assets and property.

What does PVSTOP do

The primary function of PVSTOP is to render panels to be electrically safe. PVSTOP Solar Panel Block Out allows users to cover solar panels in seconds. The water-based polymer film blocks light to the PV cells upon application.

The polymer film sticks to solar panels during all weather conditions. Even if the PV modules are wet, the coating will stick to the solar panel. When PVSTOP is dry, it is waterproof, non-flammable and electrically non-conductive. Post-incident PVSTOP can be safely and easily peeled off by hand when it is time to reactivate the system. The coating does not contain any adhesives and does not damage solar panels in any way.

PVSTOP empowers solar panel owners with a reactive tool that will render solar panels electrically safe when required, allowing for early intervention, asset protection and promotion of personnel health and safety.

We are sure that with the significant and increasing adoption of solar energy power generation, PVSTOP Solar Panel Block Out will become essential on-site safety equipment.

Find out more here

Why choose PVSTOP

• Eliminates the risk of DC electrocution from a solar panel.

 Can ‘switch off’ a panel in seconds.

 Provides early intervention leading to damage limitation.

 Does no damage to the PV system.

 Sticks to panels in all weather conditions.

 Polymer film coating easily peels off once dry.

 Environmentally friendly.

 UK manufactured. 

PVSTOP is an essential solar PV safety solution

With the significant and increasing adoption of solar energy power generation, PVSTOP Solar Panel Block Out will be essential safety equipment for solar PV systems moving forward.

PVSTOP Solar Panel Block Out 9 Litre

PVSTOP Solar Panel Block Out 4.5 Litre

For more information visit > www.jactone.com/pvstop or call +44 (0)1902 357777


Helping you stay safe today and tomorrow